ID # 31619777

New Holland Hayliner® Small Square Balers - Hayliner® 275

Call for Price
Overview

CROSS SECTION (IN. (CM))

14 X 18 (36 X 46)

LENGTH (IN. (CM))

12 TO 52 (31 TO 132) - ADJUSTABLE

A LEGACY OF INNOVATION

The Hayliner® name proudly returns across all models—fusing this legendary name, time-tested performance, and reliability with modern styling. No other brand comes close New Holland for the number of small square balers sold.

SIDE-FILL DESIGN

 The baler swings out to the right of your tractor, making it easier to see than an inline baler design. This time-tested design also means windrows won’t bunch up as they pass underneath a low tractor drawbar or hitch pin.

DEPENDABLE DRIVELINE

The Hayliner® Series offers reliable power transfer for robust performance from the Power-Pivot joint that minimizes driveline wear and chatter to the Category 6 driveline, 248 lbs. (112 kg) direct-drive flywheel, and high-capacity hypoid gear drive gearbox.

BIG CAPACITY FOR SMALL BALES 

The durable rotary feeding system provides smooth and even crop flow, while the powerful plunger runs at 93 strokes per minute to handle big windrows at impressive speeds.

 

Specifications
Model
Hayliner® Small Square Balers
Category Name
Equipment
Year
2024
Sale Type
New
Manufacturer
New Holland
driveline & pickup

GEARED UP TO GATHER CROP

Building perfect small square bales starts with reliable power transfer and a pickup that delivers a clean sweep. That’s exactly what the Hayliner® Series offers—a dependable, robust driveline fused with a wide, rugged pickup design that collects even the fine crop that others can leave behind.

POWER-PIVOT PTONew Holland Hayliner® Small Square Balers Hayliner® 275

To relieve driveline stress during sharp turns, the exclusive Power-Pivot joint minimizes driveline wear on universal joints and reduces noise. When turning beyond approximately 75 degrees, the Power-Pivot begins to breakaway—maintaining primary PTO driveline equal angles and reducing driveline chatter—without your intervention. When the turn is complete, the system is spring-reset to the normal working position.

CATEGORY 6 DRIVELINE

Unlike other balers with lighter-duty drivelines, for maximum capacity, you can push more power into a Hayliner in big windrows with the standard heavy-duty, three-joint, Category 6 driveline.

HIGH-ENERGY FLYWHEELNew Holland Hayliner® Small Square Balers Hayliner® 275

For smooth power transfer, a 248-pound flywheel dampens each plunger stroke. This direct-drive flywheel is driven with a multiplate slip clutch for gentle engagement, long life, and greater load capacity. To protect your tractor at shutdown, an overrunning clutch eliminates the risk of baling without the flywheel turning, which can occur on indirectly driven designs. Instead, the shear pin on the flywheel immediately cuts power to protect your tractor’s PTO.

MAIN GEARBOX AND PLUNGER DRIVENew Holland Hayliner® Small Square Balers Hayliner® 275

The main gearbox delivers high-capacity and smooth, quiet operation. Fitted, tapered roller bearings and heat-treated alloy-steel gears are sealed in an oil bath for smooth, quiet operation. Its hypoid gear drive powers the baler and produces 93 plunger strokes per minute at full speed.

SUPER-WIDE SUPERSWEEP™ PICKUPNew Holland Hayliner® Small Square Balers Hayliner® 275

Perfect square bales start with the wide, reliable SuperSweep pickup. Curved teeth are made from high-carbon steel alloy with an exceptionally high tensile strength. The 2.6-inch tine spacing means you’ll collect the short, fine crop that other pickups can miss. For trouble-free baling, these pickups are protected against overloads with a belt drive that acts as a slip clutch. Plus, the “lost motion drive” capability means you can back up the baler over windrows without damaging the teeth. Above the tines, a floating windguard helps control the windrow and forms a smooth crop mat for positive feeding.

A LIFT IN PRODUCTIVITYNew Holland Hayliner® Small Square Balers Hayliner® 275

All pickups are easily raised and latched by hand for transport. However, for effortless raising and lowering to adjust for differing terrain and navigate around obstacles, hydraulic pickup lift is standard on the Hayliner® 275 PLUS and optional on the other models.

 

feeding system

A BIG APPETITE FOR SMALL BALES

The rotary feeding system is durable, reliable, easy to service, and simple to adjust. It provides a smooth, even flow of crop through the baler to reduce leaf loss and produce uniform, high quality bales. Crop moves into the bale chamber with heavy-duty, paired, rotating tines and a feeder fork. The system is timed to keep material flowing evenly into the bale chamber by allowing the tines to overlap for smooth, continuous crop movement. The feeder floor below the tines is replaceable on all models for greater wear resistance, easier serviceability, and to protect your investment.

ADJUSTABLE PACKER FORKNew Holland Hayliner® Small Square Balers Hayliner® 275

A double packer fork folds crop into the bale case through a large, 283-square-inch opening. For optimum bale shape in different crop conditions, this packer fork can be adjusted on both ends in nine different positions.

POWERFUL PLUNGERNew Holland Hayliner® Small Square Balers Hayliner® 275

For maximum capacity, a fast plunger speed of 93 strokes per minute with a 30-inch stroke lets you handle big windrows at impressive speeds. Even better, with the large feed opening, the plunger can run at lower speeds while still maintaining outstanding capacity. The plunger is guided down a high-strength plunger rail and runs on sealed ball bearings and a white-iron slide block for optimal bale shape, minimal maintenance, and fewer adjustments.

BALE CASE AND CHAMBER – HAYLINER® 265 AND HAYLINER® 275New Holland Hayliner® Small Square Balers Hayliner® 275

The rugged bale chamber of the Hayliner® 265 and Hayliner 275 is designed to promote better bale formation. Six hay dogs hold charges in place to allow crop to be evenly distributed as it enters the chamber for compression, which leads to high-quality bales. Adjustable tension springs apply bale tension. Just a half-inch increase in spring tension equates to an increase of 600 pounds of force. Changing bale density is easy with the adjustable tension doors. You can also upgrade either model with two-way hydraformatic bale tension control. The hydraformatic system is self-contained and the flywheel gear-driven pump is positioned for easy adjustment and servicing.

BALE CASE AND CHAMBER – HAYLINER® 275 PLUSNew Holland Hayliner® Small Square Balers Hayliner® 275

To improve bale shape and length, the Hayliner 275 PLUS features a bale case that’s extended by 12 inches to hold the bale longer and provide extra density, which lets you make bales as heavy and dense as possible. Four-way hydraformatic tension is standard and with just the turn of the knob, tension is applied to all four sides of the bale. Hydraulically controlled side tension rails increase density and apply more consistent pressure throughout the entire bale. The Hayliner 275 PLUS is also outfitted with a hardened, high-strength steel plunger rail, 19% thicker bale chamber, and heavy-duty cast-iron hay wedges that replace the front sheet metal wedges for enhanced performance in straw compared to the Hayliner 265 and Hayliner 275.

 

technical specifications

Cross section (in. (cm))

14 x 18 (36 x 46)

Length (in. (cm))

12 to 52 (31 to 132) - Adjustable

Mechanical bale length control

Standard

Width inside (in. (m))

75 (1.9)

Width on flare in. (m)

80 (2)

Number of tines

156

Number of tine bars

6

Floating windguard

13 rods

Drive

V-belt to roller chain to “lost motion” reel drive

Gauge wheel

15 x 6.00 x 6; pneumatic

Hydraulic pickup lift

Optional

Feeding system

High-Capacity, Rotary Feeding System

Number feed rotors

3

Packer fork

Standard - Adjustable

Feed opening (sq. in. (sq. cm))

283 (1826)

Standard density system

Adjustable springs & tension doors

Optional density system

2-way Hydraformatic & tension doors

Bale case

Standard-Duty

Stroke length (in. (cm))

30 (76.2)

Strokes per minute (540 rpm)

93

Material

High Strength Steel

Plunger rail

Standard-Duty

Twine knotter

Heavy-Duty

Billhook

Hardened-Steel

Wire twister

Optional

Protection

Shearbolt

Number of twine balls

8-Twine Ball

Number of wire coils

4-Wire Coil

Flywheel weight (lbs. (kg))

248 (112)

PTO

Power-Pivot, 3-joint PTO

PTO category

Cat. 6 HD

Protection

Shearbolt, overrunning & slip clutches

Gearbox

Heat-treated hypoid gears on tapered roller bearings running in an oil bath

Right side

27 x 9.5-15, 6PR

Left side

31 x 13.50-15, 6PR

Quarter-turn chute

Optional

Triple-purpose chute

Optional

Model 72 Bale Thrower compatibility

Optional

Belt type

2-ply diamond tread

Belt width (in. (cm))

12 (30.5)

Max factory belt speed (mph (kph))

28 (45)

Belt speed control

Electric

Belt power

Hydraulically driven from flywheel

Horizontal movement

30 degrees right, left (0.52 rad), hydraulically controlled

Max bale length (in. (cm))

38 (96.5)

Max bale weight (lbs. (kg))

80 (36.3)

Max weight with 18 ft. (5.5 m) wagon (lbs. (kg))

65 (29.5)

Thrower weight (lbs. (kg))

655 (297)

Thrower height (top of bale case) (in. (cm))

31.5 (79.9)

Thrower length (from end of bale case) (in. (cm))

58.1 (147.6)

Max height (in. (cm))

71 (180)

Width (in. (cm))

120 (304)

Length (transport less chute) (in. (cm))

205 (521)

Weight (twine) (lbs. (kg))

3,715 (1685)

Weight (wire) (lbs. (kg))

3,851 (1746)

Minimum horsepower (hp (kW))

75 (56)

Minimum weight

Tractor weight must be greater than baler weight; excludes bale thrower

Hydraulic requirement

literature
Name Link
Hayliner® Small Square Balers - Brochure Download
Technical specifications Download
Call Us Get Direction Service's Request Part's Request