ID # 31619824

New Holland Draper Heads - 880CF SuperFlex™ Draper

Call for Price
Overview

CUTTING WIDTH (FT (M.))

30, 35, 40, 45 (9.1, 10.7, 12.2, 13.7)

RIGID OR FLEX

FLEX

MAXIMUM HARVESTING PRODUCTIVITYNew Holland Draper Heads 880CF SuperFlex™ Draper

Maximize the capacity of your New Holland combine with a matching New Holland draper head designed for uniform crop flow and reliable performance. Choose from models to match your crop, and available in a range of cutting widths to match your needs.

 

Specifications
Model
Draper Heads
Category Name
Equipment
Year
2024
Sale Type
New
Manufacturer
New Holland
the 840cd rigid draper head

PERFORMING FOR CROP QUALITY

The 840CD rigid draper head delivers outstanding performance in cereals, grains and specialty crops such as rice, so you can harvest every bit of your valuable crop. These rugged headers are available in cutting widths of 30, 35, 40and 45 feet.

EVEN FEEDING

A six-bat New Holland-designed cam reel smoothly feeds crop to the cutterbar and draper belts. The 30- and 35-foot heads feature a single-span, plastic-tine pickup reel while 40- and 45-foot models use a dual-span reel.

CLOSE CUTTING

The 840CD cutterbar handles high-yielding crops cleanly using three-inch guards and over-serrated knife sections with 10 or 14 teeth per inch working at 1260 cuts per minute. The header height control system features four sensors. All header widths (except the 30’ model) come with standard gauge wheels to ensure even stubble height. The hydraulically driven SynchroKnife™ drive system uses a patented single gearbox mounted in the middle of the cutterbar to drive both knife assemblies. This unique and patented design distributes weight evenly, neutralizes header vibration and leads to an exceptionally smooth cutting action.

SMOOTH DRAPER FEEDING

Variable-speed outer draper belts and fixed-speed, twin, 41.6-inch center draper belts deliver the crop smoothly to the floating 26-inch-diameter auger. The auger features five-inch flighting and handles heavy crop, feeding it smoothly into the combine. A flatter auger floor angle aids crop flow. The auger can be adjusted up and down.

 

the 880cf superflex cutterbar draper head

ULTRA-CLOSE CUTTING AND REDUCED LOSSES

The 880CF SuperFlex™ cutterbar draper head provides closer cutting and better flotation so you can harvest every bit of your valuable crop. These rugged combine heads are available in cutting widths of 30, 35, 40 and 45 feet.

IMPROVED FLOTATION

A patented, rubber spring flotation system is the key to the 880CF head's ground-following ability. You can adjust the rubber torsion springs on each floor support manually to tailor flotation to conditions or to compensate for any cutterbar unevenness. Or, ask your New Holland dealer to install optional hydraulic cutterbar flotation so you can make adjustments right from the combine cab.

CLOSE CUTTING

The six-bat reel smoothly feeds crop to the cutterbar, which cuts cleanly using three-inch guards and overserrated knife sections with 10 teeth per inch. A shorter skid shoe design reduces weight and allows the cutterbar to cut more closely to the ground for better cutterbar flexing. The header height control system makes use of either four-sensor or two-sensor combine systems. The hydraulic SyncroKnife™ drive system uses a patented single gearbox mounted under the center draper to drive both knife assemblies. This design distributes weight evenly, neutralizes header vibration and leads to an exceptionally smooth cutting action.

SMOOTH DRAPER FEEDING

Variable-speed outer draper belts and fixed-speed twin 41.6-inch center draper belts deliver the crop smoothly to the floating 26-inch-diameter auger. The auger features five-inch flighting and handles heavy crop and feeds it smoothly into the combine. A flatter auger floor angle aids crop flow. You can also adjust the auger up, down, fore and aft to match conditions. A new, patented rubber retention system prevents broken auger fingers from entering the combine.

 

technical specifications

Cutting width (ft. (m))

30, 35, 40, 45 (9.1, 10.7, 12.2, 13.7)

Rigid or Flex

Flex

Vertical Flex Range (in. (mm))

6 (152.4)

Automatic Header Height Control

Optional

Gauge / Stabilizer wheels

Optional / 35' (10.7 m) and wider

Low Speed Transport

Optional, hydraulic deploy

Single or double knife

Dual opposing knives

Knife width (in. (mm))

3 (76.2), coarse sections

Knife drive

SynchroKnife™ center mounted drive

Knife speed, strokes per minute

2 x 630 = 1260

Number of bats or tine bars

6 tine bars

Tine material

Plastic

Reel Diameter (in. (mm))

42 (1066.8)

Reel speed (rpm)

0 to 60

Cross Belt width (in. (mm))

41.5 (1054.1)

Cross Belt speed (rpm)

0 to 863

Center Infeed belt speed (rpm)

769

Center Infeed belt width (in. (mm))

41.5 x 2 = 83 (1054.1 x 2 = 2108.2)

Infeed drum or auger diameter (in. (mm))

26 (660.4)

Upper Cross Auger

Optional

Weight, 25' (7.6 m) width (lbs. (kg))

N/A

Weight, 30' (9.1 m) width (lbs. (kg))

6,230 (2,826)

Weight, 35' (10.6 m) width (lbs. (kg))

6,730 (3,053)

Weight, 40' (12.2 m) width (lbs. (kg))

8,340 (3,783)

Weight, 45' (13.7 m) width (lbs. (kg))

9,930 (4,504)

literature
Name Link
New Holland Combine Headers Download
Technical specifications Download
Documents
Call Us Get Direction Service's Request Part's Request